- Τηλεφωνικό Κέντρο: +30 2109649420
- Κινητό: +30 6974234231
Ludic Azimuth tonearm VTA cartridge ruler.
20 Απριλίου, 2022
LUDIC Atla Loudspeakercable (2pcs) 2.5 meter.
29 Απριλίου, 2022
Eam Lab STUDIO 501 limited Monoblock DEMO Black Τιμή ζεύγους.
5.000,00€
Eam Lab STUDIO 501 limited Monoblock DEMO Black Τιμή ζεύγους.
- Solid state amplifier
- balanced differential circuitry
- class A up to 10 W
- EamLab transformers
- 32 transistors MJL3281 / MJL1302
- filter capacity> 100.000uf
- 1300VA high flux density transformer
- Dual mono amplifier operating in class A up to 10 Watt• RMS power per channel 500 W @ 8 ohm, 1000 W @ 4 ohm, 1500 @ 2 ohm
• Input impedance: 47 Kohm via XLR, 47 Kohm via RCA
- • Slew / rate 44 V / uS• THD 0.003% at full power on 8 Ohm
• DF 350 on 8 ohm at 50hz
• Sensitivity 1.2 Vrms for full power
• Frequency response 10hz – 28Khz +/- 0.05 db / 28khz – 100Khz +/- 3db
• THD vs FR 0.003% @ 1Khz
• CMRR input> 88 db
- • Signal to noise ratio> 118 db• Dimensions 42x44x21 cm. (L x W x H)
• Weight 37 kg
-
The concept of a great monoblock amplifier is to provide the best control of a speaker. The hard part of the job is maintaining subtlety and musicality while doing it.
From the moment the music begins, the foundation of an exceptional musical experience is evident.
With the STUDIO 501 The sound emerges from an inky black background, revealing micro-details and performance cues typically reserved for live performances.
the low frequencies, substantial and fundamental, underline the event with material resolution and accuracy. The space around artists and instrument groups stretches out in front of you on a realistic stage.
The dynamics swings from silent passages to big fortissimi without any effortStudio 501 LTD has improvements on the outside and major performance improvements on the inside compared to the standard version
In the front panel is set an analog meter capable of displaying the power settingsInternally, it is equipped with a mammoth power supply, 100,000 uf of total capacity and a massive dose of final output devices
Visually sober and sonically breathtaking, the STUDIO 501 is unmistakably among the best amplifiers produced to date.
CIRCUIT TOPOLOGY
balanced differential configuration
In the STUDIO 501 limited edition we have implemented a balanced differential circuit which in fact makes the amplifier become reliably balanced from input to output.
In fact, each branch of the amplifier amplifies the signal in the traditional way, in class AB, but each input differential is connected on the opposite branch in counterphase, returning an amplified signal with two full but opposite waves in phase.each section of the amplifier is powered separately and all power supplies are stabilized and optimally filtered. The power is supplied by an EamDualcorETM transformer with a total power of 1,300VA and a low ESR filtering section of over 100,000uF, guaranteeing an energy supply even at high volumes and low load impedances.
The reliability and stability of driving on the load is entrusted to 16 pairs of bipolar transistors in Darlinghton MJL 3281 / MJL 1302 configuration
. Sound “microphonics”. The result is greater detail and focus of the scene and instruments.
The transformer is also isolated by a metal casing. This minimizes the magnetic induction in the delicate amplification circuits to the advantage of the sound contrast and the reduction of background noise.
The whole filter section, including the rectifier bridges, are mounted on a glass ceramic pcb. With this method we have eliminated the wiring in the air to the advantage of a lower contact resistance and a greater supply of current to the main power circuits.IN / OUT CONNECTIONS
• 1 pair of balanced XLRs
• 1 pair of RCAs
• One pair of WBT speaker terminals
• XLR / RCA switch to adapt source input
• 1 VDE 10 A power socket.
•
INPUT STAGEVia HDCA version 3. It is the first stage for interfacing with the actual amplifier and processes both balanced and single ended signals. We have given particular importance to this section as it is the first approach towards a perfect sound performance. Also for this section the power supplies are separated and stabilized. Furthermore, the HDCA modules are interchangeable and can be updated to future versions that we will release, allowing you to have a machine that is always up to date with the new sound recording and reproduction technologies.
Vu-METER
is directly connected to the load and constantly reads the real power applied to it.
INDICATORS ON THE FRONT
ILP (intelligent lock power) to monitor the operation of the amplifier.
MECHANICAL CONSTRUCTION
12mm steel bottom reinforced with ribs at critical points to minimize vibrations. 5 mm anticorodal aluminum cover, casing and lid. Front machined from solid 10mm thick
FINISH
Chassis and heatsinks painted with special heat and scratch resistant polymers.
Εταιρία
EAM LAB
Related products
-
AVR-X1700H
Out of stock2 years warranty
