Made in Germany High End power supply cable 3 x 2.5 mm με έξτρα πλεκτή θωράκιση.Τιμή ανά μέτρο.
25,00€
Περιγραφή
- Made in Germany High End power supply cable 3 x 2.5 mm με έξτρα πλεκτή θωράκιση.Τιμή ανά μέτρο.
- Temperature range
flexing +5°C to +70°C
fixed installation -40°C to +70°C
- Nominal voltage
U0/U 600/1000 V
- Max. permissible operating voltage
– 3-Phase and single phase
operation 700/1200 V
– DC operation 900/1800 V
- Test voltage
4000 V
- Coupling resistance
acc. to different cross sections
max. 250 Ohm/km
- Minimum bending radius
flexing for cable Ø:
up to 12 mm: 10x outer Ø
> 12 mm: 15x outer Ø
fixed installation 4x outer Ø
- Bare copper conductor, to
DIN VDE 0295 cl.5, fine wire,
BS 6360 cl.5, IEC 60228 cl.5
- Core insulation of polyethylene (PE)
- Core identification BK, BN, GY
- GN-YE conductor (divided into 3)
- 3+3-core structure
- Cores stranded in concentric layers
- 1. Screen with special aluminium film
2. Tinned copper braided screen,
approx. 85% coverage
- Outer sheath of special PVC
- Sheath colour: transparent
-
- Low mutual capacitance
- Low coupling resistance for high
electromagnetic compatibility
- The minimum cross section of 0,75 mm²
meets the requirements of DIN EN 60204-1
- The 3 PLUS-construction of motor power
supply cables features a symmetrical
3-core design, improved in terms of EMC
characteristics comparing favorably with a
4-core version. The protective conductor
PE, divided into 3 is uniformly stranded in
the interstices. This enables an extremely
concentric structure.
- This screened motor supply cable with
low mutual capacitance of the single cores
because of the special PE core insulation
and low screen capacitance enable a low-loss
transmission of the power compared to
PVC-sheathed connecting cables
- Due to the optimal screening an
interference-free operation of
frequency converters is obtained
- The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers
Tests
- Flame retardant acc. to
DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2
- Meets EMC requirements acc. to
EN 55011 and DIN VDE 0875-11